STP/ETP Monitoring System

Extractive type :

• Complete Engineered Panel with all electronics for monitoring parameters including.
• Standard Parameters: COD, BOD, TSS, pH,

Optional Parameters:

• DO (Dissolved Oxygen) (Range : 0-20mg/l).
• ORP (Oxidation Reduction Potential) (Range : -1999 to +1999mV ).
• Conductivity (Range : 0-2000 µS/cm).
• Turbidity (Range : 0-2000mpn/ml).
• Ammonical Nitrogen (Range : 0-50 mg/l).
• Nitrate Ion (Range : 0.3-62000 ppm).
• Coli form (Total Coli form, e-coli & Faecal Coli) (Range : 0-2000 mpn/ml).
• Orthophosphate (Range : 0.01-20 mg/l).
• Polyphosphate & Organic Phosphate .

Extractive Type

Standard Parameter

S. NO	STANDARD PARAMETER	RANGE(Can be customized)	PRINCIPAL
1.	COD	0-2000 mg/l	UV (visible absorption spectroscopy)
2.	BOD	0-2000 mg/l	UV (visible absorption spectroscopy)
3.	TSS	0-2000 mg/l	UV (visible absorption spectroscopy)
4.	pH	0-14	pH Electrode

OCEMS with Optical Probe :

Introduction:

Online effluent system based on optical probe is use to measure the water parameter like BOD, COD & TSS and the measuring principal employ in this instrument is Dual Wavelength UV absorption method

Product Advantage:

Automatic brush cleaning assembly, Zero drift is small, good repeatability, Low power consumption and long service life with strong anti-interference ability.

River Monitoring

Sonde System Overview

Multiparameter SONDE is the next generation Water Quality measurement instrument. SONDE system is used to monitor the various simple & complex River, Lake Surveys. By deployment of Multiparameter probe system (SONDE) & large range of sensors, it is able to monitor each & every parameter of water with satisfactory & reliable results

Manually cleaning is minimized, as there are two options to clean the sensing ports of the SONDE system.Auto jet cleaning with DM/clean water or dry compressed air cleaning system for different sensor assembly mainly BOD, COD, TSS, pH, DO which makes the performance of SONDE system maximized.